Tool-less Rack Rails

Extremely easy to use, tool-less rack rails install into any square hole 4-Post racks in seconds. Dell, HP, Apple & IBM compatible.


  • NC2UKIT-109-QR Front
  • All 3 Toolless Rail Kits
  • NC3UKIT-109-QR Front


Installs quickly into square hole, 4-Post racks

  • Rackmounts a variety of equipment
  • Tool-less rack rails install in seconds
  • 45 lbs, 75 lbs or 200 lbs capacity (1U, 2U, 3U)

Dell, HP, Apple & IBM compatible

  • Alternative to OEM slide rails
  • Mounting depth from 28 - 30" (711 - 762 mm)
  • Tool-less, cable management bar included
  • Work with square hole, 4-Post racks

Full Description

Tool-less rack rails can be installed into racks with square holes. Rack mount equipment weighing up to 200 lbs (90.7 kgs) can be installed using a tool-less rack rail. The rack rail is 27.87" (708 mm) deep and can be installed into server racks with installation depths from 28 - 30" (711 - 762 mm) and supports equipment up to 35" (889 mm). The tool-less rack rail for 4-Post racks

Part Numbers

Part # Description
NC1UKIT-109-QR 1U, Tool-less Rack Rails
NC2UKIT-109-QR 2U, Tool-less Rack Rails
NC3UKIT-109-QR 3U, Tool-less Rack Rails

Tool-less Rack Rails - Technical Specifications

Subject Details
Rail OEM All Purpose
Rack Type Mounts in any square hole, 4-Post rack
Note: These rail kits are not compatible with round hole racks
Hole Type Square hole only
Rail Type Fixed
Rack Units 1U, 2U or 3U
Mounting Depth Range 28 - 30" (711 - 762 mm)
Equipment Width * Maximum: 17.625 (448 mm)
1U Minimum: 16.625" (422 mm)
2U Minimum: 16.375" (416 mm)
3U Minimum: 16.75" (413 mm)
*Maximum equipment width allowed is based on worst case conditions. Wider equipment may fit depending on the mounting configuration and/or actual equipment dimensions. Please contact technical support for further assistance.
Equipment Depth The rack rails support flange is 27.87" (708 mm) long.
The rack rail will support servers computers or equipment up to 35" (889 mm) deep.
Weight Capacity 1U: 45 lbs (20.4 kgs)
2U: 75 lbs (34 kgs)
3U: 200 lbs (90.7 kgs)
Overall Installation Depth Minimum overall depth is 28"
Maximum overall depth is 30"
Cable Management Tool-less cabling crossbar is standard
Included Hardware Tool-less models do not include or require any hardware
Finish Zinc plated
Assembly Notes Ships fully assembled